The JPT M7 Series 500W/1000W
Mopa Fiber Laser Source—a single unit that simultaneously functions as a "high-speed
Laser Marking Machine" and a "heavy-duty
Laser Cleaning Machine." MOPA features independent frequency and pulse width modulation, allowing the same beam to first perform large-area rust and paint removal at 500W, then switch to 30W narrow pulse width for high-contrast marking, instantly replacing traditional dot-peen marking machines and noisy pneumatic marking machines, achieving a one-stop closed loop of "cleaning-marking-traceability."
Model Overview
?
- M7-500W: Designed specifically for "rust removal of medium-thick plates + flying laser marking," it can replace the steel needle of a
Marking Machine online, increasing cycle time by 3 times.
?
- M7-1000W: Heavy-duty mode, achieving a 1mm penetration depth in a single pass, cutting 2mm of carbon steel, and immediately switching back to 80kHz for laser marking machine depth UID, eliminating the need for secondary clamping.
?
Process Route Example
?
1. Laser Rust Removal: Sweep away oxide scale from ship plate weld seams at 50 s/m2, Ra≤25 μm.
?
2. Flight Marking: Simultaneously with a production line speed of 200 m/min, laser engrave QR codes onto bare metal, eliminating the "impact-dust suction" station of the old
Dot Peen Marking Machine.
?
3. Anodizing Layer Removal: Selectively peel off the 20 μm oxide film from the aluminum shell surface without damaging the substrate, laying the foundation for subsequent laser welding.
?
4. Precision Engraving: One-time formation of 0.1 mm micro-holes + serial numbers on plastic electroplated parts, achieving a level of precision unattainable by traditional pneumatic marking machines.
?
Serving Industries: Shipbuilding, railway, automotive, aerospace, power grid, heavy equipment, metal processing, electronics—whether you currently use a Marking Machine or a Laser Marking Machine, the M7 series can be inserted into any stage of the "clean-cut-weld-mark" process, directly replacing aging
Dot Peen Marking Machines and Pneumatic Marking Machines.
?
From core Marking Machines, Laser Marking Machines, and Dot Peen Marking Machines to Laser Cleaning and
Cutting Nozzles and Consumables , JPT provides complete
Industrial Laser Solutions, allowing high power and high precision to coexist on the same production line.
